Gasboy 1000 Series FMS Operation Manual - Manual (Page 62)

GASBOY Series 1000
7-2 05/29/03
LI - LOAD TANK INVENTORY
Use the LI command to assign the initial amount of fuel (inventory) for each tank.
1. At
the * prompt, type LI. The system displays: TANK #
2.
Type the tank number and press RETURN. The system displays: AMOUNT:
Amount is a 10-digit field with 7-digits to the left of the decimal point and 3-digits to the right.
3.
Type up to seven digits, a decimal point, then up to three more digits and press RETURN.
NOTE: If you type seven digits, the system adds the decimal point for you. If you type
three decimal places, the system automatically returns to TANK #.
4.
The system prompts you for each tank; repeat Steps 2 and 3. To stop entering inventory
data, press RETURN at the TANK # prompt. The
* prompt appears.
Example:
If Tank 2 currently contains 700 liters, the entries are:
Â
HEÂ
Â
V7PGÂÆ" ↵ Â
7IQWPV0Â' Â
Â
V7PGÂÆ ↵ Â
Â
Â