Gasboy 1000 Series FMS Operation Manual - Manual (Page 189)

Reasonable Odometer/Hours Check Option
05/29/03 22-9
CR - CHECK VEHICLE RECORD
Use the CR command to print the odometer/hours and status for a specific vehicle record.
NOTE:
The prompts and procedure steps shown in this section are for reasonable odometer.
If you have the reasonable hours option, your prompts will contain HOURS instead of
ODOM (odometer). An example of reasonable hours commands is shown at the end
of this command procedure.
1. At
the * prompt, type CR. The system displays: VEH. NO.
2.
Type the vehicle number that you wish to view and press RETURN. The listing prints and the
VEH. NO. prompt reappears.
NOTE: If the vehicle record does not exist, the system displays NO RECORD FOUND!
The VEH. NO. prompt reappears.
3.
To view additional vehicle records, repeat this procedure from Step 2.
To stop viewing vehicle records, press RETURN at the VEH. NO. prompt.
The
* prompt reappears.
Example for reasonable odometer:
9TÂ
Â
APVATÂXADÂPQÂ!( ↵ Â
Q@QIÂ $#%'(ÂÈÈÂ
Â
APVATÂXADÂPQ ↵ Â
Â
Example for reasonable hours:
9TÂ
Â
APVATÂXADÂPQÂ!( ↵ Â
DQWTUÂ ""Â
Â
APVATÂXADÂPQ ↵ Â
Â