Gasboy 1000 Series FMS Operation Manual - Manual (Page 66)

GASBOY Series 1000
7-6 05/29/03
LR - LOAD INVENTORY REORDER POINT
Use the LR command to assign an inventory reorder point for each tank. The reorder point is
printed as a reminder when the current tank totalizers are printed. When the tank totalizer drops
below the reorder level, REORDER FUEL appears in the error message field of all transactions
drawing from that tank until the inventory is adjusted above the reorder level.
1. At
the * prompt, type LR. The system displays: TANK #
2.
Type the tank number and press RETURN. The system displays: REORDER:
Reorder is a four-digit number in whole liters.
3.
Type the reorder point number and press RETURN.
4.
The system prompts you for each tank; repeat Steps 2 and 3. To stop entering inventory
reorder data, press RETURN at the TANK # prompt. The
* prompt appears.
Example:
Â
HTÂ
Â
V7PGÂÆ"
↵ Â
TAQT@AT0Â' ↵ Â
Â
V7PGÂÆ
↵ Â
Â
Â
Â