Gasboy 1000 Series FMS Operation Manual - Manual (Page 227)

Commercial Fueling Network (CFN)
05/29/03 A-7
PF - Print Fuel
Use the PF command to print a listing of each authorization code and its corresponding fuel code
assignments.
1. At
the * prompt, type PF. The listing prints.
RBÂ
Â
9Q@AÂÂÂ7HHQYA@ÂBWAHUÂ
ÂÂ!ÂÂÂÂÂ#ÂÂÂ$ÂÂ!"ÂÂ#!Â
Â%#ÂÂÂÂÂ!ÂÂÂ)ÂÂ
Â
Â
RF - Remove Fuel
Use the RF command to remove one or more fuel type codes from an authorization code.
1. At
the * prompt, type RF. The system displays: AUTH. NO:
2.
Type the authorization code number from which you want to remove fuel types. The system
displays FUEL CODE:.
3.
Type the 2-digit fuel type to be removed and press RETURN.
4.
To stop removing fuel types for this authorization code, press RETURN at the FUEL CODE:
prompt. This displays the next AUTH NO.: prompt. Skip to Step 6.
5.
Repeat Step 3 to continue removing fuel types from the authorization code.
6.
Repeat this procedure from Step 2 to remove fuel types from additional authorization codes.
To stop removing authorization codes, press RETURN at the AUTH NO.: prompt. The *
prompt reappears.
TBÂ
Â
7WVDÂPQ0Â! ↵ Â
BWAHÂ9Q@A0Â$ ↵ Â
BWAHÂ9Q@A0Â ↵ Â
Â
Â