Gasboy 1000 Series FMS Operation Manual - Manual (Page 63)

Tank Inventory Commands
05/29/03 7-3
AI - ADD TO TANK INVENTORY
Use the AI command to record the amount of fuel (inventory) added for a specific tank or tanks.
1. At
the * prompt, type AI. The system displays: TANK #
2.
Type the tank number and press RETURN. The system displays: AMOUNT:
Amount is a 10-digit field with seven digits to the left of the decimal point and three digits to
the right.
3.
Type up to seven digits, a decimal point, then up to three more digits and press RETURN.
NOTE: If you type seven digits, the system adds the decimal point for you. If you type
three decimal places, the system automatically returns to TANK #.
4.
The system prompts you for each tank; repeat Steps 2 and 3. To stop entering additional
inventory data, press RETURN at the TANK # prompt. The
* prompt appears.
Example:
If you add 2,000 liters of diesel fuel to tank 4, the entries are:
Â
7EÂ
V7PGÂÆ$
↵ Â
7IQWPV0Â" ↵ Â
Â
V7PGÂÆ
↵ Â
Â
Â