Gasboy 1000 Series FMS Operation Manual - Manual (Page 51)

Card Validation Commands
05/29/03 6-3
VC - VALIDATE A CARD
Use the VC command to validate specific cards in the lockout file. You may need to do this when
a card has been invalidated by the auto PIN lockout feature. You can validate a single card, a
string of up to 20 assorted cards, or a range of card numbers.
Validate a Single Card
1. At
the * prompt, type VC. The system displays: ENTER NO.:
2.
Type the card number to be validated and press RETURN. If the card was previously invalid
and made valid, the system displays VALIDATED, followed by
* . If the card was previously
valid, the system displays NO. IS VALID, followed by * .
Example:
Â
X9Â
Â
APVATÂPQÂ0Â! #$
↵ Â
Â
X7HE@7VA@Â
Â
Validate a String of Assorted Cards
1. At
the * prompt, type VC. The system displays: ENTER NO.:
2.
Type the card number to be validated followed by a comma.
3.
Repeat Step 2 for up to 20 card numbers.
4.
When you enter your last card number or you reach 20, press RETURN. If at least one card
was previously invalid, the system displays: VALIDATED, followed by
* . If all of the entered
cards were previously valid, the system responds NO. IS VALID , followed by * .
Example:
X9Â
Â
APVATÂPQÂ0Â!"#$"&%#"("'(
↵ Â
Â
X7HE@7VA@Â
Â
Â