Ep - enable a pump – Gasboy 1000 Series FMS Operation Manual User Manual
Page 72

GASBOY Series 1000
8-6
05/29/03
EP - ENABLE A PUMP
1. At
the
*
prompt, type EP. The system displays PUMP NO.
2.
Type the number of the pump to be enabled and press RETURN. This allows access to the
pump.
3. The system prompts you for more pumps; repeat this procedure from Step 2. To stop
enabling pumps, press RETURN at the PUMP NO. prompt. The
*
prompt reappears.
Example:
ARÂ
RWIRÂPQÂ"
↵
Â
Â
RWIRÂPQÂ
↵
Â
Â
This manual is related to the following products: