Gasboy 1000 Series FMS Operation Manual - Manual (Page 48)

GASBOY Series 1000
5-16 05/29/03
MO - DISPLAY OUTPUT BY SCREEN (MORE)
Use the MO (more) command to control screen output when you are using a CRT terminal.
Normally, when output longer than one screen is sent from the Series 1000 to the CRT terminal, it
scrolls by faster than you can read it. The MO command enables you to display the output one
screenfull at a time, then press a key to display the next screenfull.
When you reply Y (yes) to the MO command prompt, the next time you request data output, the
first screenfull appears followed by the message Press any key to continue... When you press a
key, the next screenfull appears and so on until the entire output is displayed.
1. At
the * prompt, type MO. The system prompts: DISPLAY OUTPUT ONE SCREEN AT A
TIME? .
2. Type
Y to display output one screen at a time; type N to scroll the output to the end of the
command.
Example:
IQ ↵ Â
@EURH7aÂQWVRWVÂQPAÂU9TAAPÂ7VÂ7ÂVEIA5Â2aÂQTÂP4Âa ↵ Â
Â
Â