Comtech EF Data CDM-570A User Manual
Page 88

CDM-570A/570AL Satellite Modem with Optional Packet Processor
MN-CDM570A
Updating Firmware
Revision 2
4–4
d)
Identify the firmware information and Ethernet Traffic (M&C) IP Address using one
of the following methods:
• Chapter 6. FRONT PANEL OPERATION
• Chapter 7.5 HTTP (Web Server) INTERFACE
• Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
Using the CDM-570A/570AL Front Panel menus:
• Base Modem Firmware Info – Use the SELECT: UTIL Firmware Info
Image#1 or Image#2 Bulk menu branches, as shown in this example:
Bulk#1: MM/DD/YY
FW-0020683* #.#.#
• Packet Processor Firmware Info – Use the SELECT: UTIL Firmware Info
PaP menu branches, as shown in this example:
PaP: MM/DD/YY
FW-0020781* #.#.#
• Ethernet IP Address – Use the CONFIG: Rem Ethernet Address menu
branch, as shown in this example:
Ether IP Address/Range:
192.168.001.011/24 ◄ ►,▲▼
Using the CDM-570A HTTP Interface (via the User PC Web Browser – this assumes
that you have already noted the Traffic/Management IP Address, which was
previously required to open the CDM-570A HTTP Interface):
• Base Modem Firmware Info – Use the ‘Admin | Firmware | Modem’ page, as
shown in this example: