Comtech EF Data CDM-570A - Manual (Page 279)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Serial-based Remote Product Management Revision 2
8–39
8.3.6 Modem Information Commands and Queries
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Equipment ID in
CDM-570A
Compatible Mode
(CMO=1)
N/A 36 bytes Query only.
Returns information concerning the equipment identification and the option field,in
CDM-570A Compatible Mode (CMO=1), in the form abbbcdefghi; where (Sofware
FAST options):
c = Reed-Solomon codec option:
0 = None
1 = Installed
bbb defines the modem model number:
570 = CDM-570A, 571 = CDM/R-570AL
a = Turbo option:
0 = None,
1 = All Turbo code rate but 0.95
2 = All Turbo code rate
d = Tx VersaFEC codec data rate option:
0 = None
1 = up to 512 kbps
2 = up to 1100 kbps
3 = up to 2500 kbps
4 = up to 5000 kbps
5 = up to 10239 kbps
e = Data Rate Option:
0 = Base (512 kbps)
1 = up to 1100 kbps
2 = up to 2500 kbps
3 = up to 5000 kbps
4 = up to 10239 kbps
f = Higher-order modulation:
0 = None
1 = 8-PSK/8-QAM
2 = 16QAM
3 = 8-PSK/8-QAM and 16QAM
g = Tx Roll Off Factor (5%, 10%, 15%, 20%, 25%) data rate option:
0 = None
1 = up to 512 kbps
2 = up to 1100 kbps
3 = up to 2500 kbps
4 = up to 5000 kbps
5 = up to 10239 kbps
N/A EID? EID=
cbbbadefghijklmnop
qrstABCDuuuuuuuu
uu
(see Description of
Arguments)