Comtech EF Data CDM-570A - Manual (Page 308)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Optional Packet Processor - Serial/Telnet CLI Operation Revision 2
9–12
9.3.2.2 Administration > Access Lists
Open the nested Access Lists page from the Administration page.
Use this page to limit monitor and control access to the unit from a specified list of authorized
clients.
Figure 9-5. Access Lists
If connecting to the IP modem remotely, be sure to include the IP address of the
machine used to manage the IP modem in the Access List.
Selection Hot Key Description
AccessClient1 – AccessClient4 1 – 4 Defines which remote clients can connect when the Access List
Enforcement is Enabled. Use each entry to specify an IP Address or
a subnet mask to define a unique class of machines that are allowed
access.
For example, to grant access to a PC with an IP Address of
10.10.10.1 and any PC on a subnet of 192.168.10.xxx, define the
Access List as:
AccessClient1 …[10.10.10.1/32]
AccessClient2…. [192.168.10.0/24]
Access List Enforcement E Grants the defined list of client machines access via ping, Telnet,
HTTP, FTP, and SNMP.
Toggle [Enabled] or [Disabled]:
• When Enabled, only those machines specified in the Access
Client List are allowed to connect via ping, Telnet, HTTP, and
SNMP.
• When Disabled, any client machine is able to connect via ping,
Telnet, HTTP, FTP, and SNMP.