Comtech EF Data CDM-570A - Manual (Page 187)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Ethernet-based Remote Product Management Revision 2
7–19
7.4.3.2.4 Admin | PaP Features
1) This page is available only when you install the optional Packet Processor.
2) If you submit any changes to this page, you must also open the ‘Admin | Pap
Save’ page (see Chapter Sect. 7.4.3.2.7) and immediately click [Save PaP
Parameters].
-
Figure 7-6. Admin | PaP Features Page
Features – Standard
Use the drop-down lists to set operation as Enabled or Disabled:
• Telnet • Ping Reply • Managed Switch Multicast Option
• LAN-to-LAN Routing • L2 Tx Header Compression • L2 Rx Header Compression
• Downlink Route All Available Multicast
Click [Submit] to save.
Features – Optional
• Chapter 5. FAST ACTIVATION PROCEDURE
• Sect. 7.3 Admin | FAST Page
When an optional FAST feature is not available, its associated drop-down list appears
dimmed and is non-selectable.
Use the drop-down lists to set operation as Enabled or Disabled:
• IGMP • L3/L4/L5 Rx Header Compression • Vipersat Management
• Vipersat STDMA • Vipersat File Streamer • Vipersat Auto Switching
• VMS v3.x.x VIPERSAT Management System User Guide (CEFD P/N MN/22156)
• Vipersat CDM-570/570L Satellite Network Modem User Guide (CEFD P/N
MN/22125)