Comtech EF Data CDM-570A - Manual (Page 312)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Optional Packet Processor - Serial/Telnet CLI Operation Revision 2
9–16
Selection Hot Key Description
LAN-to-LAN Routing B Toggle as Enabled or Disabled.
In response to the prompt, “ Configuring LAN-to-LAN Routing
disable the ICMP redirect Messages. Do you want
to continue (Y/N) [Enter :No]”
Type Y to enable. Otherwise, press [Enter] to maintain this feature as
disabled.
Payload Comp Type [RO] This feature is fixed, at present, to display ALDC (Adaptive Lossless
Data Compression) as the sole and default payload compression type.
Future firmware versions will allow the use of Hot Key ‘A’ for toggling
between ALDC and other available compression types.
Number of System Flows F In response to the prompt, “ System Flows should match with
peer modem’s Config. Do you want to continue
(Y/N) [Enter :No]”
Type ‘Y’ to toggle between 20,000 (CDM-570 Compatibility Mode) or
64,000. Otherwise, press [Enter] to maintain this feature as configured.
9.3.2.4 Administration > 3xDES Configuration
3xDES Encryption is a future offering and is not available in this firmware release.
This page is therefore non-functional at this time.