Comtech EF Data CDM-570A - Manual (Page 166)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Front Panel Operation Revision 2
6–62
display shows the number of available seconds remaining for the free Demo Mode. You may
turn Demo Mode Off and On as needed until this time expires.
When the Demo period expires, the following message displays:
FAST Demo Mode: Off On
Demo Period Expired
IF THE DEMO MODE STATE (OFF/ON) IS CHANGED, OR IF DEMO MODE IS
ENABLED AND THE TIMER EXPIRES, THE MODEM FIRMWARE WILL REBOOT
AUTOMATICALLY AFTER 5 SECONDS.
NOTE THAT VALIDATION OF AUTHORIZED FAST OPTIONS OCCURS ON AUTO-
REBOOT; IF AN INVALID CONFIGURATION IS FOUND, THE MODEM
CONFIGURATION WILL RESET TO ITS FAXTORY DEFAULT VALUES.
6.3.7.7.2 (UTIL: FAST) View
View Options: 03 (▲ ▼)
150W BPSU Not Installed
Use the ▲▼arrow keys to view which FAST options are currently installed or available.
The top line displays the Option Number.
The bottom line provides a self-explanatory description for that option, along with its current
operational status (“ Y” (Installed) or “N” (Not Installed)). Options listed as “N” are available for
purchase from Comtech EF Data.
AVAILABLE FAST OPTIONS
Option Number Display Message Option Type
01 150W BUC Power Supply HARDWARE
02 100W BUC Power Supply HARDWARE
03 10.239 Mbps data rate FAST
04 RS Codec FAST
05 TPC Codec FAST
06 TPC 0.95 Card Present HARDWARE
07 RESERVED –
08 Tx VFEC 10.239 Mbps FAST
09 8PSK/8QAM FAST
10 16-QAM FAST
11 Tx ROF 10.239 Mbps FAST
12 G.703 Clock Extension FAST
13 Carrier ID FAST
14 CnC Card Present HARDWARE