Comtech EF Data CDM-570A - Manual (Page 173)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Ethernet-based Remote Product Management Revision 2
7–5
The following tables list the Alarms and Faults v1 traps / v2 notifications that the modem supports.
CDM-570A/570AL Alarms and Faults SNMPv1 traps:
cdm570aUnitAlarm
6247241
cdm570aTxTrafficAlarm 6247242
cdm570aRxTrafficAlarm 6247243
cdm570aLODUAlarm 6247244
CDM-570A/570AL Alarms and Faults SNMPv2 notifications:
cdm570aUnitAlarm
1.3.6.1.4.1.6247.85.1.3.1.1
cdm570aTxTrafficAlarm 1.3.6.1.4.1.6247.85.1.3.1.2
cdm570aRxTrafficAlarm 1.3.6.1.4.1.6247.85.1.3.1.3
cdm570aLODUAlarm 1.3.6.1.4.1.6247.85.1.3.1.4
The SNMP agent supports both SNMPv1 and SNMPv2c. The “Traps” file only needs to
be compiled if SNMPv1 traps are to be used.
7.2.4 MIB-II
The CDM-570A/570AL agent implements RFC 1213 (Request for Comment No. 1213,
Management Information Base for Network Management of TCP/IP-based Internets: MIB-II,
McCloughrie/ Rose, March 1991). This is known as “MIB-II” or “Public MIB support.” The agent
implements the following groups:
Group Comments
System Group Mandatory for RFC 1213
Interface Mandatory for RFC 1213
IP Mandatory for RFC 1213
ICMP Mandatory for RFC 1213
TCP Mandatory for RFC 1213
UDP Mandatory for RFC 1213
SNMP Mandatory for RFC 1213
Address Translation Group Implemented but depreciated in MIB-II
EGP Not applicable
For detailed OID information please refer to the actual MIB file.