Comtech EF Data CDM-570A - Manual (Page 338)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Optional Packet Processor - Serial/Telnet CLI Operation Revision 2
9–42
Selection Hot Key Description
Tx Code Rate R Select the Tx code rate:
1 – 5/16
2 – 21/44
3 – 1/2
4 – 2/3
5 – 3/4
6 – 7/8
7 – 0.95
8 – 1/1
9 – VersaFEC CCM BPSK 0.488
10 – VersaFEC CCM QPSK 0.533
11 – VersaFEC CCM QPSK 0.631
12 – VersaFEC CCM QPSK 0.706
13 – VersaFEC CCM QPSK 0.803
14 – VersaFEC CCM 8-QAM 0.576
15 – VersaFEC CCM 8-QAM 0.642
16 – VersaFEC CCM 8-QAM 0.711
17 – VersaFEC CCM 8-QAM 0.780
18 – VersaFEC CCM 16-QAM 0.644
19 – VersaFEC CCM 16-QAM 0.731
20 – VersaFEC CCM 16-QAM 0.780
21 – VersaFEC CCM 16-QAM 0.829
22 – VersaFEC CCM 16-QAM 0.853
23 – VersaFEC ULL BPSK 0.493
24 – VersaFEC ULL QPSK 0.493
25 – VersaFEC ULL QPSK 0.654
26 – VersaFEC ULL QPSK 0.734
Tx Modulation M Select the Tx modulation type:
1 – BPSK
2 – QPSK
3 – OQPSK
4 – 8-PSK
5 – 16-QAM
6 – 8-QAM
Tx Spectrum Inversion U Select the Tx spectral inversion type:
1 – Normal
2 – Inverted
Tx Data Inversion I Select the Tx data inversion type:
1 – Normal
2 – Inverted
Tx Scrambling B Select the Tx scrambling type:
1 – Off
2 – On-Default
3 – On-IESS-315
Tx Output Power P Set a valid output power from 0.0 to 40.0 dBm (minus sign assumed).