Comtech EF Data CDM-570A - Manual (Page 328)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Optional Packet Processor - Serial/Telnet CLI Operation Revision 2
9–32
9.3.6 Protocol Configuration
Open the Protocol Configuration Page from the Main Menu.
Figure 9-20. Protocol Configuration
Selection Hot Key Description
IGMP I Displays the IGMP page.
ARP A Displays the ARP Table Utilities page.
DHCP Server IP Address R Allows entry of the DHCP server IP address.
Allows hosts on a remote LAN to send DHCP request packets to the DHCP
server so that the DHCP server can dynamically assign IP addresses to
remote hosts.
Brouter Mode B Displays the Brouter Configuration page.
9.3.6.1 Protocol Configuration > IGMP Information
Open the nested IGMP Information page from the Protocol Configuration page.
Use this page to view the IGMP clients that are actively listening to content being provided by
the Packet Processor. It also allows you to determine how the Ethernet Interface is configured
either to receive requests to join IGMP groups or announce groups for others to join.
Figure 9-21. IGMP Information
Selection Hot Key Description
IGMP [RO] Displays IGMP status as [Enabled] or [Disabled].
View IGMP Table V This table reports the content that clients have subscribed to the Packet
Processor using the IGMP protocol. This helps determine which services are
being used and the minimum time before a service is terminated.