10 supporting hardware and software, 1 cdm-570al/cdmr-570al l-band redundancy, 2 cdm-570a 70/140 mhz redundancy – Comtech EF Data CDM-570A User Manual
Page 47: 3 support software

CDM-570A/570AL Satellite Modem with Optional Packet Processor
MN-CDM570A
Introduction
Revision 2
1–13
Option
Description and Comments
Install Method
Optimized Transmit Filter Rolloff
(5%, 10%, 15%, 20%, 25%)
Up to 512 kbps for CCM
FAST
Up to 1.1 Mbps for CCM
FAST
Up to 2.5 Mbps for CCM
FAST
Up to 5 Mbps for CCM
FAST
Up to 10.239 Mbps for CCM
FAST
Primary Input Power Supplies
(without BUC P/S)
100 to 240V AC
HW
-24V DC
HW
-48V DC
HW
Primary Input Power Supplies
(with BUC P/S)
100 to 240V AC w/24V DC 90W @50°C BUC P/S
HW
100 to 240V AC w/48V DC 150W @50°C BUC P/S
HW
-24V DC w/24V DC 90W @50°C BUC P/S
HW
-48V DC w/24V DC 90W @50°C BUC P/S
HW
-48V DC w/48V DC 150W @50°C BUC P/S
HW
1.2.10 Supporting Hardware and Software
1.2.10.1 CDM-570AL/CDMR-570AL L-Band Redundancy
For 1:1 applications, the modem is supported by the low-cost external CRS-170A L-Band 1:1
Redundancy Switch.
For Hub applications, the modem is supported by the low-cost external CRS-300 1:N
Redundancy Switch coupled with the CRS-280L (L-Band) Redundancy Switch.
1.2.10.2 CDM-570A 70/140 MHz Redundancy
For 1:1 applications, the modem is supported by the low-cost external CRS-180 70/140MHz 1:1
Redundancy Switch.
For Hub applications, the modem is supported by the low-cost external CRS-300 1:N
Redundancy Switch coupled with the CRS-280 IF (70/140 MHz) Switch.
1.2.10.3 Support Software
The modem is supported by Comtech EF Data’s SatMac (Satellite system Monitor and Control)
Version 4.7 software, a Windows
TM
-based application that provides a ‘point and click’ interface
for the complete system of Comtech EF Data equipment (comprising Modems, Transceivers, and
Redundancy Switches).
Contact Comtech EF Data Product Support for more information or to order a free demo disk.
SatMac is also available for download from the M&C Utilities link on Comtech EF Data’s website.