beautypg.com

7 modem performance information – Comtech EF Data CDM-570A User Manual

Page 284

background image

CDM-570A/570AL Satellite Modem with Optional Packet Processor

MN-CDM570A

Serial-based Remote Product Management

Revision 2

8–44

8.3.7

Modem Performance Information

Parameter

Type

Command

(Instruction

Code and

Qualifier)

Arguments for

Command or

Response to

Query

Description of Arguments

Response to

Command

Query

(Instruction Code

and Qualifier)

Response to

Query

Rx Signal Level

N/A

4 bytes

Query Only.

Returns the value of the Rx signal level, in dBm, from –5 to –99 dBm, in the form

ccxx, where:

cc = code (GT= greater than; LT = less than, == is ‘equal to’)

xx = value (the ‘-‘ sign is implied)

Examples: <0/RSL?

1) >0/RSL=LT99 (Rx signal level is less than -99 dBm)

2) >0/RSL===41 (Rx signal level is equal to -41 dBm)

N/A

RSL?

RSL=ccxx

(see description

of arguments)

Rx Frequency

Offset

N/A

6 bytes

Query only.

Returns the value of the measured frequency offset of the carrier being

demodulated, range from ±0 to ±32 kHz, in the form sxxx.x, where:

s = sign (+ or –)

xxx.x = value

Resolution = 100 Hz

Unit returns +999.9 if the demodulator is unlocked.

Note: The maximum Rx Frequency Offset corresponds to the Receive Sweep

Width (RSW)

Example: <0/RFO?

>0/RFO=+002.3 (+2.3 kHz)

N/A

RFO?

RFO=sxxx.x

(See Description of

Arguments)

Buffer Fill

State

N/A

2 bytes

Query only.

Unit returns the value of the buffer fill state, from 1 to 99%. Returns 00 if

demodulator is unlocked.

Example: <0/BFS?

>0/BFS=33 (33%)

N/A

BFS?

BFS=xx

(See Description of

Arguments)

Rx BER

N/A

5 bytes

Query only.

Returns the value of the estimated corrected BER in the form a.bE

-c

where:

a.b = value

E

-c

= exponent.

Returns 99999 if the demodulator is unlocked.

Example: <0/BER?

>0/BER=4.8E3 (BER = 4.8 x 10

-3

)

N/A

BER?

BER=a.bEc

(see description

of arguments)

Rx E

b

/N

0

N/A

4 bytes

Query only.

Returns the value of E

b

/N

0

, from 0 to 16 dB, in the form xxxx, resolution= 0.1 dB.

Returns 99.9 if demod is unlocked.

For values >16.0 dB, Response = EBN=+016

Example: <0/EBN?

>0/EBN=12.3 (E

b

/N

0

= 12.3 dB)

N/A

EBN?

EBN=xxxx

(see Description of

Arguments)

This manual is related to the following products: