2 status | graph | spectrum – Comtech EF Data CDM-570A User Manual
Page 237

CDM-570A/570AL Satellite Modem with Optional Packet Processor
MN-CDM570A
Ethernet-based Remote Product Management
Revision 2
7–69
7.4.3.4.6.2
Status | Graph | Spectrum
(TOP) Page Example where “PICK A COLOR” = (RED), AVERAGING=High, RESOLUTION=High,
BAND=Narrow
(BOTTOM) Page Example where “PICK A COLOR” = (GREEN), AVERAGING=Low, RESOLUTION=High,
BAND=Wide (Banner, Menu Bar not shown)
Figure 7-41. Status | Graphs | Spectrum Page
Use this page to display the real-time Spectrum Analyzer. Customize the display as follows:
Feature
Description
Setting
“PICK A COLOR” Click RED or GREEN to define the
overall appearance of the graph.
•
RED waveform on a BLACK/GRAY grid
•
GREEN waveform on a GRAY/BLUE grid
AVERAGING
Allows you to select the averaging of the
FFT spectrum.
Select Off, Low, Medium, or High
RESOLUTION
Allows you to adjust the output
resolution.
Select Low, Medium, or High
BAND
Allows you to select the bandwidth span. Select Narrow or Wide
Click [START] to activate or [STOP] to pause the Spectrum Analyzer function.