Comtech EF Data CDM-570A - Manual (Page 358)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Optional Packet Processor - Serial/Telnet CLI Operation Revision 2
9–62
Selection Hot Key Description
Upgrade To U Select which Packet Processor or Base Modem firmware image
(includes Application, FPGA, and FFPGA) is overwritten in the Firmware
Update FTP process:
0 – Oldest: Updates the older firmware image based upon date.
1 – Image1: Updates the firmware image loaded into the first slot in
permanent storage.
2 – Image2: Updates the firmware image loaded into the second slot
in permanent storage.
Base Modem Boot From A Select which Base Modem firmware image is loaded upon bootup. The
possible options are:
0 – Latest: Boot the newer firmware package based upon date.
1- Image1: Boot the firmware image loaded into the first slot in
permanent storage.
2 – Image2: Boot the firmware image loaded into the second slot in
permanent storage.
Codecast Multicast Address M Set the Multicast address used by VLOAD to upgrade the modem
firmware and param file via streaming Multicast. Must match the
address specified in VLOAD.
PARAM Image C Select the PARAM file that is loaded on bootup:
1 – Last saved Parameter file
2 -Factory – uses the internal, hard-coded factory default parameters.
Statistics T Displays the Statistics page.
Event Log E Displays the Event Log page.
Database Operations D Displays the Database Operations page.
Reset R Reboots the modem (including the Packet Processor). It has the same
logical effect of power-cycling the unit.
Diagnostics G Displays the Diagnostics page.
M&C Interface F Allows base modem communications debugging.