Comtech EF Data CDM-570A - Manual (Page 212)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Ethernet-based Remote Product Management Revision 2
7–44
Delete Rule
Enter Rule Index to Delete, and then click [Delete Rule] to execute removal of the specified rule
from the QoS Max/Priority Rules Table.
The information that follows is applicable only when QoS Mode = Rule – Min/Max
Mode
QoS Min/Max Rules Table
This section displays all existing QoS Min/Max Rules Table entries. From left to right:
Column Description
Index This is the internal table index that is automatically assigned and cannot be edited.
Protocol Specifies the protocol for the specific rule.
Src IP Addr Identifies the Source IP Address in the form XXX.XXX.XXX.XXX.
Src IP Mask Identifies the Source IP Mask in the form YY.
Src IP Addr Identifies the Destination IP Address in the form XXX.XXX.XXX.XXX.
Dest IP Mask Identifies the Destination IP Mask in the form YY.
Min Src Port Specifies the Minimum Source Port.
Max Src Port Specifies the Maximum Source Port.
Min Dst Port Specifies the Minimum Destination Port.
Max Dst Port Specifies the Maximum Destination Port.
Min BW (Kbps) Specifies the Minimum Bandwidth value in kilobits per second.
Max BW (Kbps) Specifies the Maximum Bandwidth value in kilobits per second.
WRED Specifies the WRED (Weighted Random Early Detection) setting for the specific rule as
Disable or Enable.
Filtering Specifies the flow filter setting for the specific rule as Disable or Enable.
Add New QoS Rule
This section allows you to directly add a new Min/Max QoS Rule: