Comtech EF Data CDM-570A - Manual (Page 266)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Serial-based Remote Product Management Revision 2
8–26
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Unit Alarm Mask MSK= 12 bytes Command or Query.
Sets or returns Alarm Mask conditions in the form abcdefghijkl, where:
a = Tx FIFO
b = G.703 BPV
c = Tx-AIS
d = Rx AGC Alarm
e = Eb/No Alarm
f = Rx-AIS
g = Buffer slip
h = Ext Reference alarm
i = BUC alarm
j = LNB alarm
k = G.703 Loss of Signal alarm (0 = unmasked, 1 = masked)
l = spare
Notes:
1) Query response of 0 (unmasked/active) or 1 (masked) is provided for each
parameter.
2) For argument k, if G703 CEx FAST option is not installed or Tx clock is not
Internal, only 1(masked) is allowed.
Example: <0/MSK=1110011100
MSK=
MSK?
MSK*
MSK#
MSK? MSK=abcdefghijkl
(see Description of
Arguments)
Retrieve next 5
unread Stored
Events
N/A 75 bytes Query only.
Returns the oldest 5 Stored Events which have not yet been read over the remote
interface.
Reply format: {CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Sub-
body, where Sub-body= ABCddmmyyhhmmss,
A being the fault/clear indicator, where:
F = Fault
C = Clear
I = Info
B being the fault type, where:
1 = Unit
2 = Rx Traffic
3 = Tx Traffic
4 = ODU
5 = Power on/off, or log cleared
C is Fault Code numbers, as in FLT? or Info Code, where:
0 = Power Off
N/A RNE? RNE={CR}ABCddm
myyhhmmss{CR}A
BCddmmyyhhmms
s{CR}ABCddmmyy
hhmmss{CR}ABCd
dmmyyhhmmss
{CR}ABCddmmyyh
hmmss (see
Description of
Arguments)