Comtech EF Data CDM-570A - Manual (Page 183)

CDM-570A/570AL Satellite Modem with Optional Packet Processor MN-CDM570A
Ethernet-based Remote Product Management Revision 2
7–15
• SMTP Domain Name / Destination – The Administrator can assign the SMTP Domain Name
and Destination. This is required if the e-mail feature of the ‘Home | Support’ page is to be
used.
o For SMTP Domain Name, specify the domain of the e-mail server (usually found to the
right of the @ symbol in an e-mail address).
o For SMTP Domain Destination, specify the e-mail recipient name (usually found to the
left of the @ symbol in an e-mail address).
Host Access List
• IP (#) / Mask – Use the Host Access List to define which remote clients can connect when
the Access List is Enabled. Each entry allows access to a unique class of machines. Enter an
IP address and a subnet mask
For example, if it is desired to grant access to a PC with an IP Address of 10.10.10.1, and any
PC on a subnet of 192.168.10.xxx, then the Access List would be defined as:
IP 1 / Mask: 10.10.10.1/32
IP 2 / Mask: 192.168.10.0/24
For IP 3 / Mask and IP 4 / Mask, make sure they are not 0.0.0.0/0. An entry with 0.0.0.0/0
simply means any machine is allowed access.
• Access List – Use the Access List to grant access via HTTP and SNMP to a well-defined list of
client machines. Use the drop-down list to select Enable or Disable. If Disabled, then any
client machine can connect via HTTP and SNMP.
Click [Submit Admin] to save.