Dr. Livingstone, I Presume WELDWISE 2400 - Manual (Page 62)

0433-INS-400 Rev. E
6-16
Database Import Screen
• Import All
This option deletes the current databases, and
reverts to archive databases that have been
saved by a previous Export All command. The
current and archive database file names are:
Current Database
Archive Database
Livco.mdb Livcopy.mdb
Welddata.mdb Weldcopy.mdb
Note: You can only perform an Import All if an
Export All command has been previously
performed.
WARNING: Welds cannot be monitored while
the Import All option is in use. Any remote
user interface windows must also be closed.
It may take more than ten minutes to complete
an Import All command. If the Cancel button
is used, the weld monitor must be shut down
and restarted. DO NOT shutdown the weld
monitor during this operation.
• Import Masters
This option imports masters previously stored
in an archive database by an Export Masters
command. The masters archive database file
name is masters.mdb. This command will not
overwrite any existing masters. If an Import
Masters command is executed and one of the
current masters has the same name as one of the
masters in the archive, the import of that master
will be skipped. To delete a master, use the
Delete Master command in the Mastering
screen.
WARNING: Welds cannot be monitored while
the Import Masters option is in use. Any
remote user interface windows must also be
closed. If the Cancel button is used, the weld
monitor software must be shut down and
restarted. DO NOT shutdown the weld monitor
during this operation.
Figure 6-23 Import All
Figure 6-24 Import Masters
Figure 6-25 Import Masters From Floppy