Dr. Livingstone, I Presume WELDWISE 2400 - Manual (Page 174)

0454-APP-118 Rev. A
12-4
7. If you are using a mouse, click on the radio button next to Specify an IP Address and enter the
desired IP address. You may also enter a different Subnet Mask and/or Default Gateway. Click OK
to confirm the new entry.
Without a mouse, press Alt-S to select the Specify an IP Address option, then press Alt-I to go to
the IP Address entry field. (If you wish to change the Subnet Mask and/or Default Gateway, press
Alt-U for Subnet Mask and Alt-G for Default Gateway). Begin typing the new IP (or other)
address, entering periods where appropriate. For example, if the new address was 129.57.8.2, you
would enter the numbers '1', '2', '9' then a '.', then '5', '7', then a '.' then '8', then a '.' then '2' with no
spaces or commas in between or after the numbers and periods.
Press the Enter key to accept the new entry(s) and exit the window.