Dr. Livingstone, I Presume WELDWISE 2400 - Manual (Page 172)

0454-APP-118 Rev. A
12-2
2. A) If a video monitor and mouse are connected, go to Ö Start Ö Settings Ö Control Panel Ö
Network;
B) If there is no video monitor and/or mouse, press the Windows flag button (located between the
Ctrl and Alt key to the left of the spacebar) on the keyboard, or if you are using a keyboard
without a flag button, press Alt-S or Ctrl-ESC.
NOTE: From this point on, if you are not
using a video monitor you will not be
able to see everything you are doing on
the weld monitor screen. It is critical
that you follow each step exactly so
that the settings are properly entered.
If at any time you need to exit a
screen, use the ESCAPE key on the
keyboard, or using the monitor's touch
screen, select the Close option under
the File tab. All images here are
displayed as they would be on a
Livingston weld monitor.
Press the 'S' key (this will open the
Settings menu, which will not be
visible), then press the 'C' key (this will
open the Control Panel window).
Use the up/down arrow keys to highlight
Network, then press the Enter key.