Dell PowerEdge M600 - Manual (Page 759)

PIM-DM Commands 767
show ip pimdm neighbor
Use the show ip pimdm neighbor command in Privileged EXEC mode to display the neighbor
information for PIM-DM on the specified interface.
Syntax
show ip pimdm neighbor [vlan vlan-id | all]
• vlan-id—A valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example display the neighbor information for PIM-DM on all interfaces.
console(config)#show ip pimdm neighbor all
Up Time Expiry Time
Neighbor Addr Interface hh:mm:ss hh:mm:ss
--------------- ---------- --------- -----------