Dell PowerEdge M600 - Manual (Page 356)

342 Configuration and Image File Commands
www
.dell.com | support.dell.com
Example
console#ftpdownload 10.240.3.108/dell/image1 image user randall
password DellRandall
Mode........................................... FTP
Set FTP Server IP.............................. 10.240.3.108
FTP Path....................................... ./dell
FTP Filename................................... image1
Data Type...................................... Code
Destination Filename........................... image
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
FTP code transfer starting
…………………………………
File transfer complete!
console#
script apply
Use the script apply command in Privileged EXEC mode to apply the commands in the script to
the switch.
Syntax
script apply scriptname
• scriptname—Name of the script file to apply. (Range 1-31 characters)
Default Configuration
This command has no default configuration.