Dell PowerEdge M600 - Manual (Page 789)

Routing Information Protocol (RIP) Commands 797
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enters Router RIP mode.
console(config)#router rip
console(config-router)#
show ip rip
Use the show ip rip command in Privileged EXEC mode to display information relevant to the RIP
router.
Syntax
show ip rip
Default Configuration
The command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information relevant to the RIP router.
console#show ip rip
RIP Admin Mode................................. Enable
Split Horizon Mode............................. Simple
Auto Summary Mode.............................. Enable
Host Routes Accept Mode........................ Enable