Dell PowerEdge M600 - Manual (Page 536)

532 VLAN Commands
www
.dell.com | support.dell.com
vlan
Use the vlan command in VLAN Database mode to configure a VLAN. To delete a VLAN, use the
no form of this command.
Syntax
vlan vlan-range
no vlan vlan-range
• vlan-range—A list of valid VLAN IDs to be added. List separate, non-consecutive VLAN
IDs separated by commas (without spaces); use a hyphen to designate a range of IDs.
(Range: 2 - 4093)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to create (add) VLAN of IDs 22, 23, and 56.
console(config-vlan)#vlan 22,23,56
console(config-vlan)#
vlan association mac
Use the vlan association mac command in VLAN Database mode to associate a MAC address to a
VLAN.
Syntax
vlan association mac mac-address vlanid
no vlan association mac mac-address
mac-address—MAC address to associate. (Range: Any MAC address in the format
xxxx.xxxx.xxxx)
vlanid—VLAN to associate with subnet. (Range: 1-4093)