Dell PowerEdge M600 - Manual (Page 625)

IPv6 Routing Commands 629
IPv6 Routing Commands
clear ipv6 neighbors
Use the clear ipv6 neighbors command in Privileged EXEC mode to clear all entries in the IPv6
neighbor table or an entry on a specific interface.
Syntax
clear ipv6 neighbors [vlan vlan-id ]
• vlan-id—Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example clears all entries in the IPv6 neighbor table.
console(config)#clear ipv6 neighbors
clear ipv6 statistics
Use the clear ipv6 statistics command in Privileged EXEC mode to clear IPv6 statistics for all
interfaces or for a specific interface, including loopback and tunnel interfaces. IPv6 statistics
display in the output of the show ipv6 traffic command.