Dell PowerEdge M600 - Manual (Page 354)

340 Configuration and Image File Commands
www
.dell.com | support.dell.com
User Guidelines
Note that the active image cannot be deleted.
Example
The following example deletes test file in Flash memory.
console#delete backup-image
Delete: image2 (y/n)?
delete startup-config
Use the delete startup-config command in Privileged EXEC mode to delete the startup-config file.
Syntax
delete startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the startup-config file is not present when system reboots, it reboots with default settings.
Example
The following example deletes the startup-config file.
console# delete startup-config
Delete startup-config (y/n)?
filedescr
Use the filedescr command in Privileged EXEC mode to add a description to a file. Use the no
version of this command to remove the description from the filename.
Syntax
filedescr {image 1|image2} description
no filedescr {image 1|image2}
• image1|image2— Image file.
• description—Block of descriptive text. (Range: 0-128 characters)