Dell PowerEdge M600 - Manual (Page 538)

534 VLAN Commands
www
.dell.com | support.dell.com
vlan database
Use the vlan database command in Global Configuration mode to enter the VLAN database
configuration mode.
Syntax
vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enters the VLAN database mode.
console(config)#vlan database
console(config-vlan)#
vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to
a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-4093.
Syntax
vlan makestatic vlan-id
• vlan-id—Valid vlan ID. Range is 2-4093.
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database Mode