Dell PowerEdge M600 - Manual (Page 160)

126 Clock Commands
www
.dell.com | support.dell.com
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the current SNTP configuration of the device.
console# show sntp configuration
Polling interval: 7200 seconds
MDS Authentication keys: 8, 9
Authentication is required for synchronization
Trusted keys: 8, 9
Unicast Clients: Enabled
show sntp status
Use the show sntp status command in Privileged EXEC mode to show the status of the Simple
Network Time Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example shows the status of the SNTP.
console#show sntp status