Dell PowerEdge M600 - Manual (Page 136)

102 AAA Commands
www
.dell.com | support.dell.com
Syntax
ip https authentication method1 [method2...]
no ip https authentication
• method1 [method2...]—Specify at least one from the following table:
Default Configuration
The local user database is checked. This action has the same effect as the command ip https
authentication local.
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return an
error, specify none as the final method in the command line. If none is specified as an
authentication method after radius, no authentication is used if the RADIUS server is down.
Example
The following example configures https authentication.
console(config)# ip https authentication radius local
login authentication
Use the login authentication command in Line Configuration mode to specify the login
authentication method list for a remote telnet or console. To return to the default specified by the
authentication login command, use the no form of this command.
Syntax
login authentication {default|list-name}
no login authentication
• default—Uses the default list created with the aaa authentication login command.
• list-name—Uses the indicated list created with the aaa authentication login command.
Keyword Source or destination
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.