Dell PowerEdge M600 - Manual (Page 154)

120 Address Table Commands
www
.dell.com | support.dell.com
• format—Multicast address format. Can be ip or mac.
Default Configuration
If format is unspecified, the default is mac.
Command Mode
Privileged EXEC mode
User Guidelines
A MAC address can be displayed in IP format only if it is in the range 01:00:5e:00:00:00
through 01:00:5e:7f:ff:ff.
Example
In this example, Multicast MAC address table information is displayed.
console#show bridge multicast address-table
Vlan MAC Address Type Ports
------- ------------------- ------- --------------------------
-------
1 0100.5E05.0505 Static
Forbidden ports for multicast addresses:
Vlan MAC Address Ports
---- ----------------------- -----------------------------------
-----
1 0100.5E05.0505
NOTE: A multicast MAC address maps to multiple IP addresses, as shown above.
show bridge multicast filtering
Use the show bridge multicast filtering command in Privileged EXEC mode to display the
Multicast filtering configuration.
Syntax
show bridge multicast filtering vlan-id