Dell PowerEdge M600 - Manual (Page 178)

146 DHCP Filtering Commands
www
.dell.com | support.dell.com
no ip dhcp filtering trust
Default Configuration
Any DHCP response received on a trusted port will be forwarded.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to configure an interface as trusted for DHCP snooping
purposes.
console(config-if-1/g3)#ip dhcp filtering trust
show ip dhcp filtering
Use the show ip dhcp filtering command in Privileged EXEC mode to display the DHCP snooping
configuration.
Syntax
show ip dhcp filtering
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the DHCP filtering configuration.
console#show ip dhcp filtering
Switch DHCP filtering is enabled
Interface Trusted
-------------------- -------
1/g1 no