Dell PowerEdge M600 - Manual (Page 697)

OSPF Commands 703
Example
console#show ip ospf abr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
----- --------- ----- --------------- --------- --------
INTRA 3.3.3.3 1 0.0.0.1 10.1.23.3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 10.1.24.4 vlan12
show ip ospf area
Use the show ip ospf area command in Privileged EXEC mode to display information about the
identified OSPF area.
Syntax
show ip ospf area area-id
• area-id—Identifies the OSPF area whose ranges are being displayed. (Range: 0-
4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays OSPF router information.
console#show ip ospf area 10
AreaID......................................... 0.0.0.10
External Routing............................... Import External
LSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0