Dell PowerEdge M600 - Manual (Page 297)

System Management Commands 275
Example
The following example displays a system version (this version number is only for
demonstration purposes).
console>show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
------------------------------------------------------------------
unit image1 image2 current-active next-active
-----------------------------------------------------------------
1 K.3.9.1 0.0.0.0 image1 image1
2 K.3.9.1 0.0.0.0 image1 image1
stack
Use the stack command in Global Configuration mode to set the mode to Stack Global
Config.
Syntax
stack
Default Configuration
This command has no default mode.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the mode to Stack Global Config.
console(config)#stack
console(config-stack)#