Dell PowerEdge M600 - Manual (Page 282)

260 System Management Commands
www
.dell.com | support.dell.com
show sessions
Use the show sessions command in Privileged EXEC mode to display a list of the open telnet
sessions to remote hosts.
Syntax
show sessions
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a list of open telnet sessions to remote hosts.
console#show sessions
Connection Host Address Port
---------- ------------ ----------- ------
1 Remote switch 172.16.1.1 23
2 172.16.1.2 172.16.1.2 23
The following table describes the significant fields shown in the display.
Field Description
Connection Connection number
Host Remote host to which the switch is connected through
a Telnet session
Address IP address of the remote host
Port Telnet TCP port number