Dell PowerEdge M600 - Manual (Page 122)

86 Management ACL Commands
www
.dell.com | support.dell.com
User Guidelines
Rules with ethernet, vlan, and port-channel parameters are valid only if an IP address is
defined on the appropriate interface. Ensure that each rule has a unique priority.
Example
The following example shows how all ports are denied in the access-list called mlist.
console(config)# management access-list mlist
console(config-macal)# deny
management access-class
Use the management access-class command in Global Configuration mode to restrict
management connections. To disable restriction, use the no form of this command.
Syntax
management access-class {console-only|name}
no management access-class
• name—A valid access-list name. (Range: 1 to 32 characters)
• console-only—The switch can be managed only from the console.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures an access-list called mlist as the management access-list.
console(config)# management access-class mlist
management access-list
Use the management access-list command in Global Configuration mode to define an access list
for management, and enter the access-list for configuration. Once in the access-list configuration
mode, the denied or permitted access conditions are configured with the deny and permit
commands. To remove an access list, use the no form of this command.