Dell PowerEdge M600 - Manual (Page 514)

510 Telnet Server Commands
www
.dell.com | support.dell.com
Syntax
ip telnet port port number
• port number—Telnet service port number (Range: 1–65535)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
Example
console(config)#ip telnet port 45
console(config)#no ip telnet port
show ip telnet
This command displays the status of the Telnet server and the Telnet service port number.
Syntax Description
show ip telnet
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
Example
(console)#show ip telnet
Telnet Server is Enabled. Port:23