Dell PowerEdge M600 - Manual (Page 159)

Clock Commands 125
Clock Commands
show clock
Use the show clock command in User EXEC mode to display the time and date from the system
clock.
Syntax
show clock
Default Configuration
This command has no default setting.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example displays the time and date from the system clock
console>show clock
15:29:03 Jun 17 2002
Time source is SNTP
show sntp configuration
Use the show sntp configuration command in Privileged EXEC mode to show the configuration of
the Simple Network Time Protocol (SNTP).
Syntax
show sntp configuration