Dell PowerEdge M600 - Manual (Page 248)

220 LLDP Commands
www
.dell.com | support.dell.com
lldp transmit-tlv
Use the lldp transmit-tlv command in Interface Configuration mode to specify which optional
type-length-value settings (TLVs) in the 802.1AB basic management set will be transmitted in the
LLDPDUs. To remove an optional TLV, use the no form of this command.
Syntax
lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
no lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
• sys-name—Transmits the system name TLV
• sys-desc—Transmits the system description TLV
• sys-cap—Transmits the system capabilities TLV
• port desc—Transmits the port description TLV
Default Configuration
By default, no optional TLVs are included.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to include the system description TLV in local data
transmit.
console(config-if-1/g3)#lldp transmit-tlv sys-desc
show lldp
Use the show lldp command in Privileged EXEC mode to display the current LLDP configuration
summary.
Syntax
show lldp
Default Configuration
This command has no default configuration.