Dell PowerEdge M600 - Manual (Page 249)

LLDP Commands 221
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the current LLDP configuration summary.
console# show lldp
Global Configurations:
Transmit Interval: 30 seconds
Transmit TTL Value: 120 seconds
Reinit Delay: 2 seconds
Notification Interval: limited to every 5 seconds
console#show lldp
LLDP transmit and receive disabled on all interfaces
show lldp connections
Use the show lldp connections command in Privileged EXEC mode to display the current LLDP
remote data. This command can display summary information or detail for each interface.
Syntax
show lldp connections [detail] [ethernet interface]
• detail—Specifies that a detailed version of remote data is included
• interface—Specifies a valid physical interface on the switch or unit/port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following examples display both the summary information and the detailed information.