Dell PowerEdge M600 - Manual (Page 251)

LLDP Commands 223
Examples
This example show how the information is displayed when you use the command with the all
parameter.
console#show lldp interface all
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
1/g1 Up Enabled Enabled Enabled 0,1,2,3 Y
1/g2 Down Enabled Enabled Disabled Y
1/g3 Down Disabled Disabled Disabled 1,2 N
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System
Description, 3 –
System Capability
console# show lldp interface 1/g1
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
1/g1 Up Enabled Enabled Enabled 0,1,2,3 Y
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System
Description, 3 – System Capability
show lldp local-device
Use the show lldp local-device command in Privileged EXEC mode to display the advertised
LLDP local data. This command can display summary information or detail for each interface.
Syntax
show lldp local-device {detail interface | interface | all}
• detail—includes a detailed version of remote data.
• interface—Specifies a valid physical interface on the device, unit/port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode