Dell PowerEdge M600 - Manual (Page 432)

424 SNMP Commands
www
.dell.com | support.dell.com
Example
The following examples display the configuration of filters with and without a filter name
specification.
console # show snmp filters
Name OID Tree Type
------------------- ----------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
user-filter2 1.3.6.1.2.1.2.2.1.*.1 Included
console # show snmp filters user-filter1
Name OID Tree Type
------------------- ----------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
show snmp groups
Use the show snmp groups command in Privileged EXEC mode to display the configuration of
groups.
Syntax
show snmp groups [groupname]
• groupname—Specifies the name of the group. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.