Dell PowerEdge M600 - Manual (Page 583)

DHCPv6 Commands 583
show ipv6 dhcp pool
Use the show ipv6 dhcp pool command in Privileged EXEC mode to display the configured DHCP
pool.
Syntax
show ipv6 dhcp pool pool-name
• pool-name—Name of the pool. (Range: 1-31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the configured DHCP pool.
console#show ipv6 dhcp pool test
DHCPv6 Pool: test
show ipv6 dhcp statistics
Use the show ipv6 dhcp statistics command in User EXEC mode to display the DHCPv6 server
name and status.
Syntax
show ipv6 dhcp statistics
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.