Dell PowerEdge M600 - Manual (Page 408)

398 Radius Commands
www
.dell.com | support.dell.com
no radius-server retransmit
• retries—Specifies the retransmit value. (Range: 1 - 10)
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the number of times the Radius client attempts to
retransmit requests to the Radius server to 5 attempts.
console(config)#radius-server retransmit 5
radius-server source-ip
Use the radius-server source-ip command in Global Configuration mode to specify the source IP
address used for communication with Radius servers. To return to the default, use the no form of
this command. 0.0.0.0 is interpreted as a request to use the IP address of the outgoing IP interface.
Syntax
radius-server source-ip source
no radius-server-ip
• source—Specifies the source IP address.
Default Configuration
The default IP address is the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.